Innokin EZ WATT Starter Kit

Innokin EZ WATT Starter Kit Overview

Designed with a user-friendly interface, the Innokin  EZ WATT Starter Kit provides a quality vaping experience for beginners and makes a great addition to any veteran’s collection. While the low-wattage EZ WATT Mod is extremely efficient and easy to use, Innokin has cleverly paired it with the ergonomic Prism T20S Tank for a cloud-chasing and flavor enhancing MTL duo.

The sleek EZ WATT Mod has a height of 120mm, a width of 28mm, and a depth of 16mm with a simple two-button control face. The button near the top of the mod is not only the power and firing button, but it also acts as a battery life indicator. To turn on the device, click the power button three times and it will brightly light up one of three colors. Green means the battery is full, yellow means you have half battery life, and red means it’s time to charge up. The second button located just above the micro USB port can be easily accessed to adjust the power output of the device. Above the second button are three bright LEDs that indicate which power setting you are in. When the light is green, your output wattage is 13-14W. Blue lets you know you’re at 16-18W, and white is the most powerful at 30-35W. To adjust your wattage, you must hold both the power button and the select button simultaneously. The mod also arrives with several non-adjustable features as well, delivering an intuitive device that’s easy to use no matter what type of vaper you are. The EZ WATT features a maximum voltage of 7.5V and a current of 13.5A with a standby current of 100uA. The EZ WATT Mod is powered by an internal 1500mAh battery and will outlast similar devices due to the mods lower power-output. 

The Prism T20S Tank has a 20mm diameter that sits perfectly flush on top of the EZ WATT Mod via threaded 510 connection. As seen in some previous Innokin tanks, the 510 threading on the Prism is an extension of the coil head. Pre-installed inside the tank is a tried-and-true Prism S 0.8 ohm coil head that’s rated for best use between 16-18W. Innokin also includes a Prism S 1.5 ohm coil head that’s rated at 13-14W for a more flavor-driven vaping experience. The Prism Tank houses a 2mL e-juice capacity and features a top-filling mechanism that can be easily accessed by removing the threaded 7mm Delrin drip tip. If you’re not a fan of this threaded-style mouthpiece,  Innokin includes a secondary tapered drip tip in the box. The Prism tank is outfitted with two 3mm by 2mm non-adjustable airslots to deliver a clean and smooth draw, every time.

With its grand simplicity, the Innokin EZ WATT Starter Kit is just the device for you if you’re looking to get into the vaping lifestyle. With its Mouth-to-Lung style build, this starter kit offers great vapor production and unrelenting flavor for an all-around superb vaping experience.

Features：
Designed for MTL (Mouth To Lung) Vaping
Dimensions: 16 x 28 x 120mm (D x W x H)
Output Wattage: 13 - 35W
Maximum Output Voltage: 7.5V
Preset Power Modes: 13-14W / 16-18W / 30-35W
Minimum Resistance: 0.2 ohm
Battery: 1500 mAh Internal Cell
Tri-Color LED Battery Life Indicator
Tank Capacity: 2 mL
Top Fill Design with Twist Cap
Prism Dual Airflow Technology
Dual Post Velocity Style Build Deck

Content：
1 x Innokin EZ WATT Mod
1 x Innokin Prism T20-S Tank
1 x 0.8 ohm Prism S Vape Coil (Pre-installed)
1 x 1.5 ohm Prism S Vape Coil
1 x Extra Drip Tip
1 x Micro USB Cable
1 x Set of Spare O-Rings
1 x User Manual